Wireless access point - 802.11a/b/g/n - Dual Band The EWS310AP can operate as a stand-alone Access Point connecting to third-party PoE-capable switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series wireless network management solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ switch.This capability enables IT managers to deploy and manage up to 50 EWS310APs from Neutron Series switch allowing for simplified management from one browser-based interface including simultaneous firmware upgrades, clustering, traffic monitoring, bandwidth steering and many other features that can be reset or reconfigured from the convenience of the IT manager's desktop.Operating in both the 2.4 GHz and 5 GHz frequency spectrums and supporting 802.11 a/b/g/n standards the EWS310P features wireless speeds up to 300 Mbps on each radio, a gigabit port for connecting to 802.3at/af-capable PoE switches, and an enhanced receive sensitivity MIMO (Multiple In / Multiple Out) antenna array. As a result, the EWS310AP is ideal for spacious environments such as large homes, small and medium-sized businesses, multiple-floor offices, hotels, hospitals, and other multi-floor buildings.As the EWS310AP is designed for deployments on desktops or on ceilings where power outlets may be scarce, it also comes equipped with PoE (Power-over-Ethernet) IEEE 802.3at/af for use with an 802.3at/af-capable PoE injector or 802.3at/af-capable PoE switches, drawing up to 15.6 watts of power.The EWS310AP helps to make managing a network easier with its standardized GUI. To protect sensitive data during wireless transmissions, the EWS310AP offers different industry-standard encryption settings for wireless transmissions, including WEP, WPA-PSK, WPA2-PSK, WPA-PSK Mixed, WPA Enterprise, WPA2 Enterprise, and WPA2 Mixed Enterprise. It also includes MAC address filtering to allow network administrators to offer network access only to verified computers and devices based on their MAC addresses. Supports IEEE 802.11 a/b/g/n standards with up to a 300 Mbps data rate on each bandDynamic channel optimizationDesigned for indoor ceiling or desktop deployments4 internal MIMO antennas/dual-bandBand steering shifts dual-band clients to 5 GHz for better throughput performanceSeamless roaming, fast handover Device Type - Wireless access pointRuggedized Design - IndoorWidth - 6.4 inDepth - 6.4 inHeight - 1.6 inWeight - 12.8 ozRAM - 64 MB SDRAMFlash Memory - 16 MBForm Factor - ExternalConnectivity Technology - WirelessData Transfer Rate - 300 MbpsLine Coding Format - DBPSK, DQPSK, CCK, 64 QAM, BPSK, QPSK, OFDMData Link Protocol - IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11nSpread Spectrum Method - OFDMRemote Management Protocol - SNMP 1, SNMP 3, SNMP 2c, HTTP, CLIFrequency Band - 2.4 GHz, 5 GHzStatus Indicators - Power, WLAN, LANFeatures - Syslog support, traffic shaping, MAC address filtering, IPv6 support, firmware upgradable, MIMO technology, wall mountable, Spanning Tree Protocol (STP) support, Wi-Fi Multimedia (WMM) support, event log, Quality of Service (QoS), Multiple SSID support, reset button, ceiling mountable, tagged VLANEncryption Algorithm - MD5, AES, SSL, TLS, PEAP, TTLS, TKIP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise, WEPAuthentication Method - RADIUS, Basic Service Set Identifier (BSSID)Compliant Standards - IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11a, IEEE 802.3af, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, IEEE 802.3atAntenna - InternalAntenna Qty - 4Directivity - Omni-directionalGain Level - 5 dBiInterfaces - 1 x 1000Base-T (PoE) - RJ-45Included Accessories - Mounting bracketsCables Included - 1 x network cableCompliant Standards - IC, FCCPower Over Ethernet (PoE) Supported - PoEPower Device - External power adapterVoltage Required - AC 120/230 V ( 50/60 Hz )Service & Support - Limited warranty - 1 yearMin Operating Temperature - 32 FMax Operating Temperature - 122 FHumidity Range Operating - 0 - 90% (non-condensing)
|Brand:||Engeniuos||Condition:||New||UPC:||655216007116 ||MPN:||EWS310AP |
Be the first to review this product! Have you purchased this product in the past,
or have experience with it? Be sure to pass your opinion on to our other users!
Accepted Payment Methods
Shipping & Handling
||3 business days
Standard Shipping (3-7 days)
||Contiguous U.S., APO/FPO/DPO
||AK, HI, PR, PO Boxes
|Free Standard Shipping on all products sold by this seller.|
Item(s) must be returned within 14 days after arrival.
Refund will be given as: Refund Money.
Howardstore return policy must be followed in order to receive a refund. Do not send a product back without first notifying Howardstore through the Pricefalls Messaging Center. Â If the product is returned to an address not provided by Howardstore, customer will lose any right to a refund. Any return request must be made within 14 days of the date of purchase. Product return requests to Howardstore after 14 days will not be processed. Customers may return products that are no longer wanted or needed within 14 days and ONLY if the box is not opened. Returns will not be allowed for an opened box unless upon opening the box, the product has been damaged in shipment or the product does not match our Howardstore listing. If customer wishes to return a product they no longer want or need or if customer changes their mind during the shipment process, the customer is responsible for all shipping cost related to sending the product back to Howardstore. If the product is damaged in shipping or the product does not match our Howardstore listing, the customer must notify Howardstore through the Pricefalls Messaging Center of the situation. Howardstore does request pictures be sent to verify the damage and to support any shipping carrier investigations. Howardstore will assume all responsibility for having the damaged product or incorrect product received sent back to the manufacturer. Some manufacturers, such as Sony, HP, Samsung and Lenovo, stipulate they must handle all returns for their products directly. In these cases, customers will be instructed on how to contact the manufacturer for an exchange.
Â Â Software and Consumables:
OPENED SOFTWARE, CONFIGURE-TO-ORDER, PERSONALIZED, CUSTOMIZED PRODUCTS AND CONSUMABLES (TONER CARTRIDGES, INK CARTRIDGES AND DIGITAL MEDIA) MAY NOT BE RETURNED FOR REFUND, EXCHANGE OR CREDIT. Software licenses purchased under any type of volume purchase agreement or any non-Howard customized hardware and/or software product(s) may not be returned at any time. Â Hardware, Parts, Accessories and Peripherals:
Unopened software Â accessories, peripherals, parts only and/or hardware may be returned within fourteen (14)Â days from the date on the invoice for a credit or refund of the purchase price paid.Â Any request for a return of an opened item that is the result of an HTS error or defective item will NOT be accepted.Â Â Non-Howard Technology Solutions Branded/Third-Party Products:
HTS makes no warranties for Software, or Non-Howard Technology Solutions branded products. HTS provides such product â€œas isâ€. If you discover what you believe is a product defect for any third-party product, you may contact HTS within 14Â days of receipt of the product for assistance. After 14Â days from product receipt, warrantyand service is provided by the product manufacturer and not by Howard Technology Solutions. Please note that products sold through the HTS website that do not bear the Howard Technology Solutions brand name are serviced and supported exclusively by their manufacturers in accordance with the terms and conditions packaged with the products. Howardâ€™s Limited Warranty does not apply to products that are not Howard-branded, even if packaged or sold with Howard products. Â Â APO/FPO Addresses:
If youâ€™re an APO/FPO customer and youâ€™re outside the domestic delivery area, the standard Return and Refund Policy appliesâ€”with the exception that youâ€™re responsible for shipping the product back to a state-side return address, plus handling, customs, and inventory liability. We recommend that you insure your return against loss. Â Freight Claims:
The recipient of product agrees to report claims for damage, shortage, or errors in material as follows: Â a) Claims for damage and/or shortage caused by shipping must be made by the recipientÂ to the shipper within five (5) calendar days of delivery i. All items in question must be kept in their original cartons and at the original delivery point for inspection by the carrier ii. If notified, HTS will assist the purchaser as possible with the claim b) Claims involving shortages or errors will not be considered unless noted on the delivery receipt and reported to HTS within five (5) calendar days of delivery Â Return Procedures:
To return products, you must contact Howard service and support at 888-912-3151 or via Pricefalls to obtain a Return Merchandise Authorization (RMA) number within the return policy period applicable to the product you want to return. You must ship the products to Howard within five (5) days of the date that Howard issues the Return Merchandise Authorization Number. Â You must: 1) Ship the product(s), and insure the shipment or accept the risk of loss or damage during shipment. 2) The RMA number must be prominently displayed on the shipping label or visible on the outside of the shipping package. 3) Return the products in their original packaging, in as - new condition along with any media, documentation, and all other items that were included in the original shipment, unless returned product is defective. Â The refund process takes approximately thirty-(30) days. Upon receipt of the complete returned purchase, Howard will issue a credit or a refund of the purchase price paid. Refunds will be refunded to the original form of payment and only to the buyer of the product listed on the invoice. Â HTS is not responsible for any personal data or personal items returned with a product in error.