D-Link DWL-P50 - PoE splitter
mouseover to zoom or click to enlarge
Product ID 53289
Brand D Link
Condition New
UPC 790069271694
MPN DWL-P50
SKU S2420994
Category

D-Link DWL-P50 - PoE splitter by D Link

USD $35.99 Free Shipping
In Stock102 Available

Have one to sell? Sell Yours Now

PoE splitter The DWL-P50 Power over Ethernet adapter is a single-port splitter that provides DC power for a non-PoE-equipped device, such as a surveillance camera or a wireless access point. It is designed to operate with LAN switches and other equipment that support industry-standard 802.3af Power over Ethernet (PoE) to deliver operation power to the networked device, allowing you to install the device at places such as on a rooftop or near a ceiling, where power is not easily accessible. The DWL-P50 supports both 5VDC and 12VDC power and can be flexibly deployed with network devices with different power voltage requirements.The DWL-P50 is useful for installation at a factory or TM Wi-Fi hot spot. This compact adapter allows you to install your surveillance cameras and wireless LAN devices on a building rooftop, on or near a ceiling for maximum coverage. Your cameras or wireless access points can be placed up to 100 meters away from a power source. It is at these places that wall AC outlets are inaccessible and providing power to these locations is difficult and expensive. The DWL-P50 is also handy for installation at offices with Internet telephones connected to a PoE Ethernet switch. It eliminates the need to individually power each IP phone. By transmitting remote power through the standard network cabling, the DWL-P50 does away with the need for an AC outlet at each device location. Only a single Ethernet cable is run to each device instead of separate power and data cables.On a standard 4-wire UTP Category 5 cable, only two pairs (pins 1, 2, 3 and 6) are used for Ethernet data transfer. At one end, your PoE Ethernet switch inserts DC voltage into the unused wires, taking advantage of the unused pair of the network cable wires. At the other end, the DWL-P50 taps the DC power from the Ethernet cable for use by the non-PoE device. Consequently, a single Category 5 cable can now carry both Ethernet data and DC power. The idea is to supply the remote end with power and Ethernet connectivity via a single network cable.In addition to eliminating the need for additional, separate wiring for power, the DWL-P50 is also a useful tool that forms part of your centralized power network installation. A central UPS can be added to the PoE switch, to which all your wireless access points, surveillance cameras and Internet phones are connected. This installation provides uninterrupted power without the need to deploy a separate UPS for each device.The DWL-P50 is very small in size and lightweight and requires no configuration setting. It is designed for quick and easy deployment, and can be hooked with a simple plug to a network device placed on a high wall or ceiling. This PoE adapter supports both 5V and 12V DC output, allowing you to deploy it with a variety of devices with different power requirements. A built-in slide switch allows you select the required power output.
  • Facilitates Installation
  • Data and DC Power Transmission on the Same Network Cable
  • Centralized Power Provision, Easy Deployment
  • Very Compact Size, Simple Installation
  • Device Type - PoE splitter - external
  • Cables Included - 1 x network cable 1 x power cable
  • Be the first to review this product! Have you purchased this product in the past, or have experience with it? Be sure to pass your opinion on to our other users!

    There are no Customer Reviews yet

    You can enjoy additional savings on this product. Simply choose a promotion below, and share it with your friends. Your discount will be applied instantly.

    Accepted Payment Methods

    Shipping & Handling

    Store Location Ellisville, MS
    Ships within 3 business days
    Shipping Options Standard Shipping (3-7 days)
    Ships to Contiguous U.S., APO/FPO/DPO
    Excludes AK, HI, PR, PO Boxes
    Shipping Rates
    Free Standard Shipping on all products sold by this seller.

    Returns Policy

    Item(s) must be returned within 14 days after arrival.
    Refund will be given as: Refund Money.

    Howardstore return policy must be followed in order to receive a refund. Do not send a product back without first notifying Howardstore through the Pricefalls Messaging Center.  If the product is returned to an address not provided by Howardstore, customer will lose any right to a refund. Any return request must be made within 14 days of the date of purchase. Product return requests to Howardstore after 14 days will not be processed. Customers may return products that are no longer wanted or needed within 14 days and ONLY if the box is not opened. Returns will not be allowed for an opened box unless upon opening the box, the product has been damaged in shipment or the product does not match our Howardstore listing. If customer wishes to return a product they no longer want or need or if customer changes their mind during the shipment process, the customer is responsible for all shipping cost related to sending the product back to Howardstore. If the product is damaged in shipping or the product does not match our Howardstore listing, the customer must notify Howardstore through the Pricefalls Messaging Center of the situation. Howardstore does request pictures be sent to verify the damage and to support any shipping carrier investigations. Howardstore will assume all responsibility for having the damaged product or incorrect product received sent back to the manufacturer. Some manufacturers, such as Sony, HP, Samsung and Lenovo, stipulate they must handle all returns for their products directly. In these cases, customers will be instructed on how to contact the manufacturer for an exchange.

        Software and Consumables: OPENED SOFTWARE, CONFIGURE-TO-ORDER, PERSONALIZED, CUSTOMIZED PRODUCTS AND CONSUMABLES (TONER CARTRIDGES, INK CARTRIDGES AND DIGITAL MEDIA) MAY NOT BE RETURNED FOR REFUND, EXCHANGE OR CREDIT. Software licenses purchased under any type of volume purchase agreement or any non-Howard customized hardware and/or software product(s) may not be returned at any time.   Hardware, Parts, Accessories and Peripherals: Unopened software  accessories, peripherals, parts only and/or hardware may be returned within fourteen (14) days from the date on the invoice for a credit or refund of the purchase price paid. Any request for a return of an opened item that is the result of an HTS error or defective item will NOT be accepted.    Non-Howard Technology Solutions Branded/Third-Party Products: HTS makes no warranties for Software, or Non-Howard Technology Solutions branded products. HTS provides such product “as is”. If you discover what you believe is a product defect for any third-party product, you may contact HTS within 14 days of receipt of the product for assistance. After 14 days from product receipt, warrantyand service is provided by the product manufacturer and not by Howard Technology Solutions. Please note that products sold through the HTS website that do not bear the Howard Technology Solutions brand name are serviced and supported exclusively by their manufacturers in accordance with the terms and conditions packaged with the products. Howard’s Limited Warranty does not apply to products that are not Howard-branded, even if packaged or sold with Howard products.     APO/FPO Addresses: If you’re an APO/FPO customer and you’re outside the domestic delivery area, the standard Return and Refund Policy applies—with the exception that you’re responsible for shipping the product back to a state-side return address, plus handling, customs, and inventory liability. We recommend that you insure your return against loss.   Freight Claims: The recipient of product agrees to report claims for damage, shortage, or errors in material as follows:   a) Claims for damage and/or shortage caused by shipping must be made by the recipient to the shipper within five (5) calendar days of delivery i. All items in question must be kept in their original cartons and at the original delivery point for inspection by the carrier ii. If notified, HTS will assist the purchaser as possible with the claim b) Claims involving shortages or errors will not be considered unless noted on the delivery receipt and reported to HTS within five (5) calendar days of delivery   Return Procedures: To return products, you must contact Howard service and support at 888-912-3151 or via Pricefalls to obtain a Return Merchandise Authorization (RMA) number within the return policy period applicable to the product you want to return. You must ship the products to Howard within five (5) days of the date that Howard issues the Return Merchandise Authorization Number.   You must: 1) Ship the product(s), and insure the shipment or accept the risk of loss or damage during shipment. 2) The RMA number must be prominently displayed on the shipping label or visible on the outside of the shipping package. 3) Return the products in their original packaging, in as - new condition along with any media, documentation, and all other items that were included in the original shipment, unless returned product is defective.   The refund process takes approximately thirty-(30) days. Upon receipt of the complete returned purchase, Howard will issue a credit or a refund of the purchase price paid. Refunds will be refunded to the original form of payment and only to the buyer of the product listed on the invoice.   HTS is not responsible for any personal data or personal items returned with a product in error.